- Contact Person : Ms. Li Margrate
- Company Name : SenSpro Electronics Co., Ltd.
- Tel : 86-139-22852464
- Fax : 86-0755-26643011
- Address : Guangdong,shenzhen,B9, 3rd Fl., Shangfu Bldg., Dengliang Rd., Nanshan Dist.
- Country/Region : China
- Zip : 518054
TP3 series flat diaphragm pressure sensor
Related Product Searches:TP3 series flat diaphragm pressure sensor,High Quality,sensor, pressure sensor,TP3
TP3 series is flat diaphragm pressure sensor without chamber design, which make sure no jam during measuring process. It adopts MEMS technologies on one piece construction of stainless steel diaphragm in more than 1mm thickness, which avoid scratching from hard solid inside the media. Non oil construction leads no leakage problem.
This series is compensated with digital ASIC as well as EMI/RFI protection. The TP3 series are highly accurate, reliable and stable with high level output option, eg. 0.5-4.5 VDC, 0-5 VDC, 0-10 VDC, 4-20 mA output.
General Specification at 25 degree C | |
Pressure range: | 0 - 1 to 100MPa |
Non-linearity: | ±0.5% of FS Span |
Hysteresis: | ±0.2% of FS Span |
Repeatability: | ±0.2% of FS Span |
Media compatibility: | 17-4 PH stainless steel |
Pressure cycles: | >108 full pressure cycles |
Pressure overland: | 2X rated pressure |
Burst pressure: | 5X or 20000 PSI whichever is less |
Long term stability: | ±0.25% FS Span (Typical) |
Installation thread: | M20x1.5mm, G1/2, G3/4 and etc |
| |
Electrical: | |
Supply voltage: | 5VDC or 10-30VDC |
Outputs: | 0.5-4.5VDC, ratio metric, 1-5VDC, fixed or 4-20mA, two wire |
Zero offset: | ±1% of FS |
Span tolerance: | ±1% of FS |
EMI Protection: | 100V/m |
Electrical connection: Cable or connector |
|
| |
Environmental Performance |
|
Operating temperature range: | -40 to 125 (or consult) |
Compensated temperature range: | 0 to 70 |
Temperature Error: | ±1%FS (within compensation temperature range) |
TP3 series flat diaphragm pressure sensor
