SD8 series differential pressure sensor

* Air differential pressure sensor * Range: +/- 200Pa ~ +/-100KPa optional * High accuracy and stability

SensPro Electronics supplies differential pressure sensor made by MEMS technolgoy and compensated by digiatal ASIC.  The differential pressure sensor / transducer / transmittercan be used for gage or differentail pressure measurement.

Performance at 25 degree C:
	Pressure range (in  KPa)	0 to 0.2, 1, 5, 10, 25, 50, 100
	Differential (in KPa)	under ±5	±6~35	above 35
	Line Pressure (in KPa)	≤35	≤70	≤1,000
	Pressure overload	5 x	3 x	2 x
	Burst pressure	10 x	7 x	5 x
	Accuracy	≤1.0%	≤0.5%	≤0.25%
	Media compatibility	Typically air or similar Non-conducting gases
	Pressure ports	Ø6.5mm or 5.2mm barbed Stainless Steel
	Case	Cast Aluminum
	Weight	470g
	Mounting	2 mounting tabs with M4
	Long term stability (1 year)	±0.5% FS Span (Typical)
Electrical:
	Supply voltage	12 ~ 36 VDC, 24VDC Standard
	Supply current	<5mA for voltage output type
	Outputs	1-5VDC,  4-20mA
	Interface	PG-7 with 0.5m cable
	Zero offset	±2% of FS Span
	Span tolerance	±2% of FS Span
Environmental Performance
	Operating temperature range	-25 to 65 (or consult)
	Storage temperature range	-30 to 85
	Temperature Co-efficiency	0 to 65  3 x 10-4/FS/
	Compensated temperature range	5 to 65
	Zero thermal error	<±2% of FS
	Span thermal error	<±2% of FS

SD8 series differential pressure sensor